Plastering that lasts – the right materials for the substrate

Short answer: Plastering requires the right mortar and method for the building. In older houses, the wrong material can trap moisture and cause cracking or delamination.

We assess substrate, climate and previous layers to choose a system that performs over time.

When is lime plaster the right choice?

Lime plaster often fits older buildings where the wall needs to breathe and move. It is more flexible than hard cement-based mortars and reduces the risk of cracking.

We assess the substrate and existing layers before recommending materials.

Basements and moisture – let the wall breathe

Moisture is critical in basements. Too dense mortars can trap moisture and lead to damage over time.

We choose materials that work with the building’s moisture movement for a durable result.

Plastering on lath and reed mat

On lath walls, reed matting is often used as a base. The right plaster build-up is needed for adhesion and to handle movement.

We have experience with this type of work and know what is required for a lasting finish.

Preparation that makes the difference

Plastering is more than a surface. Preparation, mesh, priming and correct build-up determine how long it lasts.

We follow proven systems and consult supplier guidance when needed.

Renovation plaster and repairs

Repairing plaster requires materials that work with existing layers. Too hard patches can lead to new cracking.

We identify the cause and propose a solution that fits the building.

Our process

We start with a free site visit to review substrate, damage and scope. You then receive a quote or cost estimate.

Once everything is clear we plan the work and carry out the plastering with regular check-ins.

Before a site visit – good information helps

To give the right recommendation, please prepare:

  • photos of surfaces and damage
  • approximate measurements
  • info about previous materials or repairs
  • what matters most (function, look, durability)

Plastering in Gothenburg & Northern Halland

We work in Gothenburg, Kungsbacka, Varberg, Fjaras and Frillesas, plus nearby areas. Contact us and we will guide you.

Get in touch to take the next step. Read more about us on the homepage.

Repair, replaster or rebuild the right way

Describe the substrate (facade, basement or lath work) and your goal and we will guide you to the right mortar, method and scope.

Murkvalitet Västsverige AB
Org. no.: 559296-5544
Hakansgardsgatan 85, 434 36 Kungsbacka
By clicking Send, you agree to our terms.

Plastering FAQs

Why does plaster fall off?

Common causes are the wrong material for the substrate, moisture or poor preparation. If plaster is too dense it can trap moisture and delaminate.

We assess the cause and recommend a solution that fits the building, not just a quick patch.

Lime plaster or cement mortar – which is right?

Lime plaster is often right for older buildings that need to breathe and move. Cement mortars are harder and may fit other cases, but the wrong choice can lead to cracking.

We assess substrate and previous materials before recommending a mortar.

Is plaster suitable for basements?

Yes, but material choice is critical. In basements, moisture is a key factor and overly dense mortars can create problems.

We choose materials that work with the building’s moisture movement for a durable result.

Can you plaster on lath and reed mat?

Yes. This type of substrate requires the right build-up and materials for adhesion and long-term performance.

We have experience with lath and reed mat work and adapt the method to the building.

How long does drying take?

Drying time depends on material, thickness, temperature and ventilation. We always provide guidance based on site conditions.

You will get clear advice for your specific project before we finish.

Does all old plaster need to be removed?

Not always. It depends on condition, adhesion and the existing material. Sometimes sections must be removed to create the right bond.

We assess on site and recommend the approach that gives the best durability.

Do you take small repairs?

Yes. We handle both small repairs and larger plastering projects. Smaller jobs still require the right materials to last.

Describe your needs and we will suggest the right approach.

Do you work on older or listed buildings?

Yes. We often work on older buildings where material knowledge is crucial. Method and mortar are adapted to the building.

We hold certified craftsmanship and long experience in this work.

What happens during a free site visit?

We review surfaces, substrate and damage on site and discuss goals and expectations. That gives the right basis for method and material choices.

We then provide a quote or cost estimate depending on scope.

Do you work in Gothenburg and Northern Halland?

Yes. We work in Gothenburg, Kungsbacka, Varberg, Fjaras and Frillesas, plus nearby areas. We are based in Kungsbacka.

Contact us and we will confirm the best approach for your project.